ASTM A53 ERW steel pipe
Certificate: UL Listed/ FM Approved
Standard: ASTM A53, Type E, Grade B
Dimension: Sch10/ Sch40 as ASME B36.10M
Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
MS Pipe & Fitting
Our Products
MS Pipe & Fitting
Choose your perfect need from our wide range of Certified products.
Our MS Pipe & Fittings are specifically developed to match with the pipe fitting installation and repair requirements of the Fire Fighting, oil, food processing, pharmaceutical Industry
We offer the full spectrum of services to help you choose the right system.
Request a QuoteASTM A53 ERW steel pipe is a typical carbon steel pipe. It is largely used to convey fluids at low / medium pressures such as oil, gas, steam, water, air and also for mechanical applications.
ComplianceBD supplies ASTM A53 ERW steel pipe in UL listed/ FM approved.
ASTM A53 specification also covers seamless steel pipe. The pipe is intended for pressure and mechanical applications and is also acceptable for ordinary uses in oil, gas, steam, water and air lines. It is suitable for welding, bending and flanging.
COMPLIANCE BD supplies ASTM A53 seamless steel pipe in UL listed.
ASTM A53 seamless steel pipe
Certificate: UL Listed
Standard: ASTM A53, Type S, Grade B
Dimension: Sch40/ Sch80 as ASME B36.10M
Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
GROOVED FITTINGS
TPMC provides grooved fitting in UL listed/ FM approved:
Grooved 90° elbow
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Type: Short radius, R=1.0D
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved 45° elbow
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Type: Short radius, R=1.0D
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved 22.5° elbow
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved straight tee (Equal tee)
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved reducing tee
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved reducing tee with threaded branch
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Branch: Female thread, NPT/ BSPT
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved straight cross (Equal cross)
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved reducing cross
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved reducing cross with threaded branch
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Branch: Female thread, NPT / BSPT
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved concentric reducer
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved concentric reducer with threaded run
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Minor run: Female thread, NPT/ BSPT
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved eccentric reducer
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved end cap
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Grooved drain cap with concentric hole
Certificate: UL Listed/ FM Approved
Standard: ANSI/ UL 213C
Material: Ductile iron as ASTM A536, 65-45-12
Centre hole: Female thread, NPT/ BSPT
Temperature: -30°C to 300°C
W. pressure: 300PSI (2.07MPa)
Surface: Red paint/ hot dip galvanized
Explore More
